31
External Cache
Enabled (default)--- enable L2 cache
Disabled --- disable L2 cache
CPU L2 Cache ECC Checking
Enabled (default)--- enable L2 cache ECC checking
Disabled--- disable L2 cache ECC checking
Quick Power On Self Test
This category speeds up power on self test.
Enabled --- BIOS will shorten or skip some check items.
Disabled (default) --- normal speed
Boot sequence
This category determines which drive the system searches first. Take “A,C,SCSI”
for example. System will search in turn for floppy disk drive; second is hard disk
drive, and finally SCSI drive. Default value is “A,C,SCSI.”. Options are as below:
A,C,SCSI; C,A,SCCI, C,CDROM,A; CDROM,C,A; D,A,SCSI; E,A,SCSI;
F,A,SCSI; SCSI,A,C; SCSI,C,A; C Only; LS/ZIP,C.
Swap Floppy Drive
Enabled: floppy A&B will be swapped.
Disabled(default): floppy A&B will be not swapped.
Boot Up Floppy Seek
BIOS will determine if the floppy disk drive is 40 or 80 tracks. 360k type is 40
tracks while 720K/ 1.2M and 1.44M are all 80 tracks. Default value is enabled.
Boot Up Numlock Status
:On(default)
:Off
