3
Cartridge Installation
Step 1:
Place cartridge cover underneath
litter tray. The cover is extra protection
from leaks and will be used later for
cartridge disposal.
Step 2
: Write cartridge installation
and change dates on waste trap. You
may want to note these dates on a
calendar too.
Then remove litter container and
inner packaging.
Step 3:
Lift up litter box up by grasping
waste lid. For added convenience, stand
litter box on its end.
Step 4:
Grasp cartridge by waste trap
and slide opposite end of cartridge
against back of litter box.
Step 5:
Lower litter box onto cartridge.
You should hear a click, which confirms
the magnets on the waste lid have
grabbed the magnet
contacts on the
litter cartridge.
Make sure the litter box is level and
is sitting on the cartridge.
Step 6:
Open litter container and tear
corner notch to open bag. Empty into tray
and spread litter evenly.
Do not lift waste
door! Do not put litter in waste trap!
Step 7:
Activate rake by pressing and
holding the cycle button on the top
of the litter box to start the rake.
Your litter box is now ready for use!
Warning:
Do not use the
cartridge for more than 30 days.
If overused, it may leak urine.
