Lucks SM160B AR, Instruction And Maintenance Manual

Page: 16 / 92

MAN019.00
16
Once the outer packing material has been removed, in
order to unpack the machine, it is first necessary to
remove
the fastening bolts (pos. B in Errore.
L'argomento parametro è sconosciuto., or pos. E in
Errore. L'argomento parametro è sconosciuto.).
In order to lift the unpacked machine from the pallet,
use:
1.
an overhead crane of appropriate lifting capacity,
hooking the belt to the column, as indicated in
Errore. L'argomento parametro è sconosciuto.,
bearing in mind that the mixer tends to lean forward;
2. an appropriate fork lift truck, first inserting an
appropriate tube through the belt suitably placed
around the mixer and then resting the tube itself on the
forks suitably positioned, as indicated in Errore.
L'argomento parametro è sconosciuto., bearing in
mind that the machine tends to lean forward.
For additional information on the procedure for lifting
the unpacked machine from the pallet and placing it in
the chosen position, refer to the next section.
All the material used for the packaging, excluding the
fastening bolts, can be recycled or disposed of as
ordinary urban waste.
4.3 LIFTING AND MOVING THE MACHINE
Lifting the machine with packaging
Before starting, check the total weight of the machine
with packaging and then use appropriate equipment to lift
the packed machine. In the case when a transpallet or
fork lift truck is used, the machine must be lifted by
inserting the forks into the pallet in the positions
indicated
in the corresponding figures (Errore.
L'argomento parametro è sconosciuto. and Errore.
L'argomento parametro è sconosciuto.).