manualshive.com logo in svg

Lucent Flexent Modular Cell 4.0B, Installation Manual, Page: 9 / 66

Share
Download
Lucent Flexent Modular Cell 4.0B Installation Manual Download Page 9

v i

Lucent Technologies – Proprietary
See notice on first page

 401-703-454

FOA Draft Issue 1

January, 2006

...........................................................................................................................................................................................................................................................

When connecting 60ECv2 and WNG24-BC battery cabinets to 
PowerHouse 24 and WNG24-K power cabinets, respectively, the 
instructions are provided in Outdoor Flexent CDMA Modular Cell 1.0/
2.0 Cabinet Installation Manual, 401-710-123. 

The tasks mentioned on the previous page are to be performed after 
completion of all site preparation tasks, which are covered in Flexent 
Modular Cell 4.0/4.0B Outdoor Site Preparation Guidelines, 401-703-
413.

Important!

The procedures contained in this IP are based on 

Lucent Technologies standard practices. Prior to beginning a 
Modular Cell 4.0B cabinet, or battery cabinet installation, 
installers should be familiar with these practices. If there is a 
conflict, standard practices take precedence. However, this IP 
takes precedence for identification of parts and materials specific 
to a Modular Cell 4.0B cabinet, or battery cabinet installation.

Important!

Following installation of the Modular Cell 4.0B 

cabinet, the next step is to test and integrate it into the network. 
Procedures for testing and integration may be found in Installation 
Engineering Handbook 238.

Summary of Contents for Flexent Modular Cell 4.0B



































































Reviews:

No comments