Overview of the Flexent‚ Modular Cell 4.0B cabinet
installation
1 - 1 3
Lucent Technologies – Proprietary
See notice on first page
401-703-454
FOA Draft Issue 1
January, 2006
............................................................................................................................................................................................................................................................
EZBFo battery frames (first
and second)
This section provides a brief description of the EZBFo battery frame,
which is a backup power configuration for an outdoor Flexent Modular
Cell 4.0B primary cabinet with integrated power.
The optional EZBFo battery frame provides additional backup batteries
to supplement the batteries in an integrated power one to eight carrier
4.0B primary or dual band cabinet. The optional EZBFo battery frame
provides the initial backup batteries for an integrated power 4.0B
primary or dual band cabinet having more than 8 carriers. The batteries
are charged by the primary or dual band cabinet, as applicable.
The optional EZBFo battery frame may also be used to provide
additional backup batteries to supplement the batteries a 3GP24i power
cabinet used with non-integrated 4.0B primary or dual band cabinets.
The figure below illustrates one of two possible battery frames. Each
frame is comprised of a battery base module and two add-on modules.
The battery base module is installed first. Subsequently, add-on
modules may be separately installed. The modules below are shown
with front panels. They may also be equipped with a front door.
Note: When installing a second add-on module in zone 4, a zone 4
mounting kit is required.
Battery Base
Module
Second Add-On
Battery Module
First Add-On
Battery Module