Mitel SX200D ONS (77135)
C o n f i d e n t i a l
4
The above information is provided by Lucent Technologies as a guide.
See disclaimer on page 1
Lucent Technologies
O c t e l M e s s a g i n g D i v i s i o n
216
Data
Security
259
Message
Sending
261 ONS Voice Mail Port
265 - Voice Mail system Speed Dial Index
303-312 Paging Zone Access (Dependent upon zone assigned)
313 CO to CO Trunk Connect
314 CO to Tie Trunk Connect
315 CO to DID Trunk Connect
316 Tie Trunk to Tie Trunk Connect
317 Tie Trunk to DID Trunk Connect
318 DID to DID Trunk Connect
Assign trunks to ring in for Auto Attendant Applications
Day, N1, N2 answer points are assigned in this form:
Bay, Slot, CCT
Physical location of Trunk
COS
Class of Service for Trunk (Default 1)
Ten
Tenant Group Number
Day, N1, N2
Assign Answer Point - Pilot Number of the
Octel 50 for designated time slot
Tk Num
Trunk ID Number
Tk Name
Names can be up to 8 characters
FORM 17 - HUNT GROUPS
Create a Hunt Group containing Octel 50 ports:
Header lines indicates which Hunt Group is being programmed, the access
code, type of hunting used and type of hunt group. Our example is 221.
Ext Num
List members of hunt group according to
extension
number
Stn/Set
Press this softkey to define type as Stn/Set
Circular/Terminal
Press softkey - Terminal
Hunt Group
02
Enter valid hunt group number, example is 02
Access Code
221
Enter a valid number unique to database, can be a
maximum
of
5 digits, example is 221
Program a hunt group for the Message Waiting port using the same above
procedure.
Note: See section 7.3 about hunt group for message waiting ports.
The Message Waiting Hunt Group is NOT the same as the ONS
Hunt Group.
