background image

Mitel SX200D ONS (77135)

          

C o n f i d e n t i a l

 

10

 

The above information is provided by Lucent Technologies as a guide. 

  See disclaimer on page 1 

Lucent Technologies 

O c t e l   M e s s a g i n g   D i v i s i o n

 

7.4 

DIRECT CALL FOR MESSAGE RETRIEVAL 

Instruct subscribers to dial the pilot number of the Octel 50 hunt group to 
retrieve their messages (or program a button on the phone to do the same).  
This will retain the Direct Call feature for message retrieval.  Otherwise, if a 
subscriber presses the Message Call Back soft key, the call will forward from 
the OUTBOUND port into the Voice Mail Hunt group and will lose the 
integration information; the system will answer with the main greeting. 

7.5 RECORD TELEPHONE CONVERSATION 

Record Telephone Conversation is a Telephone Switch dependent feature 
which allows a called Subscriber to record a conversation between himself 
and the calling party to the called stations mailbox.  In order to have this 
function the switch must allow for three-way conference.

 

The Subscriber receives a call they which to record.  They hook-flash, get 
dialtone, dial the speeddial code for immediate record 501.  The SX200D 
connects to the Octel 50 sends the stored digit string 7+extension number.  
The Subscriber hear a beep indicating the call is being recorded.  The 
Subscriber hook-flash’s again and forms a three-way-conference. 

The system is not sized to accommodate all Subscribers the ability to 
record telephone conversations.  Subscribers who do expect to use that 
function should have the value in mailbox class of service increased for 
message time.  A value of 600 would allow for a recording of a 10-minute 
conversation. 

© Copyright 1994 to 1999 Lucent Technologies  All rights reserved. 

Printed in the United States 

*Trademark of  Mitel 

DIALOG/4 ™ is a registered trademark of Dialogic Corporation  
 TR112 is a registered trademark of Brooktrout Technology Inc. 

All other products or services mentioned are the trademarks, service marks, registered 

trademarks, or registered service marks of their respective owners.

 

 

LUCENT TECHNOLOGIES

 

OCTEL MESSAGING DIVISION

 

1001 Murphy Ranch Road 
Milpitas, CA 95035-7912 
(408) 321-2000

 

 (CFN 77135) 

Summary of Contents for Mitel SX200D Series











Reviews: