Result:
The title bar of the System View reflects the current
NE software generic, (for example, R2.1.0).
............................................................................................................................................................
14
Were you able to log into the shelf?
If...
Then...
Yes
Continue with
No
Contact your next level of support.
............................................................................................................................................................
15
Did you have circuit IDs provisioned prior to the replacement?
If...
Then...
Yes and you have a current
backup file.
Proceed to
•
“Procedure 6-8: Backup and restore
NE database via FTP” (6-165)
or
•
“Procedure 6-9: Backup and restore
NE database via FTTD” (6-177)
or
•
“Procedure 6-10: Backup and
restore NE database via FTAM”
(6-192)
Yes but you do not have a
current backup file.
From the System View, select
Configuration
→
Cross-Connections
and select
″
Modify parameters on an
existing cross-connection,
″
click
Next
and follow the Wizard to provision the
circuit ID(s).
No
STOP! End of Procedure.
E
N D
O F
S
T E P S
..............................................................................................................................................................................
Procedure 6-3: Replace a SYSCTL
(VLNC1) circuit pack
Supporting procedures
....................................................................................................................................................................................................................................
6 - 4 6
Lucent Technologies
365-372-333 R2.1
Issue 4, June 2005