Lucent Technologies FAX Attendant System Release 2.1.1 System Manager'S Manual Download Page 266

Page: 266 / 324

System Messages

716 (UNK_TYPE), MAJOR
MTC detected an invalid type (<integer>), on card <device>.

Maintenance detected an invalid device type in shared memory. This is an
indication of system problems.

■

Try stopping and restarting the Voice System or rebooting the system.

717 (SYS_FAIL), MAJOR
MTC cannot <string> for card <device>, return= <integer>, errno=
<integer>.

Maintenance failed a system call. This is an indication of system problems.

■

Try stopping and restarting the Voice System or rebooting the system.

718 (NO_CLOCK), MAJOR
MTC cannot find clock on card <device>.

Maintenance detected no clock on a system-master board. This is an
indication of hardware problems. The board may need to be replaced.

■

Try removing the device from service and rebooting the system. If the
device passes initial boot diagnostics, you may then restore the
device.

722 (GET_SEMA), MAJOR
MTC cannot acquire the semaphore.

Maintenance cannot create the semaphore. This is an indication of system
problems.

■

Try stopping and restarting the Voice System or rebooting the system.

723 (SET_SEMA), MAJOR
MTC cannot set the semaphore.

Maintenance cannot lock the semaphore. This is an indication of software
problems.

■

Try stopping and restarting the Voice System or rebooting the system.

B-24

System Messages

Summary of Contents for FAX Attendant System Release 2.1.1





































































































































































































































































































































Search results

Summary of Contents for FAX Attendant System Release 2.1.1

Reviews:

Related manuals for FAX Attendant System Release 2.1.1

Brands by name

Popular brands

Lucent Technologies FAX Attendant System Release 2.1.1, System Manager'S Manual

Search results

Summary of Contents for FAX Attendant System Release 2.1.1

Reviews:

Related manuals for FAX Attendant System Release 2.1.1

Brands by name

Popular brands