Upgrading System Software
Loading software
CellPipe™ SDSU User’s Guide
5-3
To load software, proceed as follows:
1
From the Main Menu, select
System Utilities
.
2
Select
File Transfer Utility
.
3
Select
Send or Receive via XMODEM
.
4
When prompted, enter the name of the file to be transferred.
5
Enter
no
when prompted to change console speed.
6
The following message appears:
Now Receiving ff...
This message indicates the unit is ready to receive the file.
7
At the HyperTerminal menu bar, select
Transfer > Send File
.
8
In the Send File window, set the Protocol field to Xmode, browse to and select
the file to transfer, and click Send.
You are prompted when the file transfer has been successfully completed.
Note:
Perform step 8 quickly or you will time out.
9
Repeat step 1 through step 8 for each file in the set except
acos.bin
.
10 Select
Update ACOS [acos.bin]
to transfer the
acos.bin
file.
11 To reset the system when all the files have been loaded, select
Hard Reset
under System Utilities in the Main Menu or do a power plug pull.
