Configuring a CellPipe SDSU
Configuring WAN interface
4-4
CellPipe™ SDSU User’s Guide
To enable payload scrambling, proceed as follows:
1
From the Main Menu, select
Configure Interface
.
2
Select
SDSL
.
3
Select
Configure ATM Options
.
4
Select
Payload Scrambling
.
5
Enable Payload Scrambling.
Assigning IP addresses for PVC connections
You need to assign an IP address to each PVC connection on the WAN interface.
To assign an IP address, proceed as follows:
1
From the Main Menu, select
Configure IP Router.
2
Select
Configure Port IP Address
.
3
Select
SDSL
.
4
Select a port and assign the appropriate IP address.
Configuring for Frame Relay
Transmission via the SDSL connection on the CellPipe SDSU requires you to
configure your WAN interface to run either ATM or Frame Relay datalink protocol.
To configure for Frame Relay, proceed as follows :
1
From the Main Menu, select
Configure Interface
.
2
Select
SDSL
.
3
Select
Configure Datalink Protocol
.
4
Select
Frame Relay
.
Configuring DLCIs
When using Frame Relay as your data link protocol, you need to configure DLCI
connections for each port you use. You can have up to seven DLCI connections with
each DLCI establishing a port.
