Lucent Technologies Inc.
57
Manual
August 2000
Venus AT Command Reference Manual
V.25ter Commands
(continued)
+DR—Data Compression Reporting
This command will turn on/off the compression report.
■
Range: 0—1
Valid Parameter Syntax:
■
+DR=<value>
■
+DR?
■
+DR=?
Table 98. DR=x Data Compression Report Value
If the compression report is enabled, the +DR:<type> intermediate result code, reports the current DCE-DCE data
compression type. It is issued after the Error Control Report (+ER) and before the final result code (e.g., CON-
NECT). The format is shown in Table 99.
Table 99. +DR=x Data Compression Reporting Intermediate Result Codes
+ATSO—Store Telephone Number
This command stores up to three dialing strings for later use. The format for the command is:
+ATSO=<location>,<dial_string>
<location> is a value of 0 to 2, which represents the three locations where the number may be written.
<dial_string> is the dialing string to be stored.
Valid Parameter Syntax:
■
+ATSO=<location>,<dial_string>
■
+ATSO?
■
+ATSO=?
Command
Function
+DR=0
This command turns off the compression report.
+DR=1
This command turns on the compression report.
Command
Function
+DR: NONE
Data compression not in use.
+DR: V42B
V.42 bis is in use in both directions.