6
3. Remove the two screws from the covering plate on top of the motor housing (Fig. 4), and remove the plate.
Fig 4.
4.
Insert the blade through the slots around the motor. Align the blade with the three holes, and secure the three
screws through the opening exposed when the covering plate was removed. If the holes do not align, the blade is
upside down. The blade is designed to fit snugly; the screws should be vertical with the blade. Tighten all blade
screws evenly and securely to ensure quiet, wobble free operation of the fan. Repeat this process for all blades.
Replace the covering plate on top of the motor housing. Fig.4.
5. Carefully lift the fan and seat the down rod ball assembly into the spacing allocated in the mounting bracket and
lock the ball into place.
Fig. 5
Fig.5
6. Insert and secure the light bulbs (Max. 15W CFL Spiral only, not included) into the ES sockets as shown in Fig.6.
NOTE: FOR FAN MODELS WITHOUT LIGHT, IGNORE THIS INSTALLATION PROCESS.
7. Carefully place the glass shade cover over the lamp and twist clockwise to lock it. The glass shade must be
inserted correctly before you can lock it in, so check the locking mechanism when performing this task. Fig.7.
NOTE: FOR FAN MODELS WITHOUT LIGHT, IGNORE THIS INSTALLATION PROCESS.
8. Refer to the wiring diagram provided for Electrical Connection/installation. Fig. 8 & 9
WARNING: To prevent electrical shock or risk of fire, do not attempt to perform the electrical connection
wiring yourself. All electrical connections must be carried out by a qualified licensed electrician.
NOTE: An additional all pole disconnection switch must be included in the fixed wiring.
9. After completing the electrical wiring at the mounting bracket terminal and connecting the fan motor and fixed
wiring via the quick connector, cover the mounting bracket with the canopy cover. Ensure all electrical wirings are
tucked inside the canopy cover and that they are not damaged during this step, and secure with screws. Fig.10
