5
NOTE: Unlike most ceiling fans, you must attach the blades to the motor housing BEFORE mounting the
motor to the ceiling. When installing more than one fan, ensure that the blades sets are not mixed up as
each set is dynamically balanced.
The AIRLIE SERIES ceiling fan are now packaged with the motor, down rod and canopy cover
pre-assembled. Before installation, please check to ensure all screws and nuts are re-tightened as they may
become loose during transportation.
TOOLS REQUIRED
-
Phillips head screw driver
-
Flat head screw driver
-
Pair of pliers
-
Step ladder
-
Wire cutter
-
Wiring, supply cable as required by AS/NZS 3000 wiring code.
1. The ceiling fan must be installed in a location so that the blades are at least 2.1 meters above the floor, and
300mm spacing from the tip of the blade to the nearest objects or walls.
2. Secure the hanging bracket to the ceiling joist or structure that is capable of carrying a load of at least 30KG, with
two long screws provided. Ensure at least 30mm of the screw is threaded into the support. Fig 2.
NOTE: Ensure the mains power supplies are switched OFF during installation.
NOTE: The bracket screw provided is for use with wooden structure only. For structures other than wood,
the appropriate screw type MUST be used.
INSTALLATION INSTRUCTIONS
INSTALLING THE FAN
