background image

Airfusion Akmani Installation Instructions 

 

 

 

38 | 

P a g e  

 

       

 

 

 

 

 

 

CONGRATULATIONS ON YOUR PURCHASE 

Congratulations on purchasing the latest in energy saving ceiling fans. This fan runs on DC (direct current) power which 
gives it the benefit of being super energy efficient whilst still maintaining high volume air-movement and silent operation.  
 
Energy Saving - The DC motor is the latest technology in fan design. Its highly efficient motor saves up to 65% more 
energy than ceiling fans with traditional AC motors.   
 
Silent operation 

– this DC fan motor is programmed with a stabilized current which efficiently reduces motor noise. 

 
Low operating temperature 

– The DC power is managed effectively which brings down the motor operating temperature 

to less than 50degs. This results in a much cooler motor than a standard AC fan and increases the longevity of the motor. 
 
6 speed remote control, regular AC ceiling fans usually come with only 3 speeds, this DC fan comes complete with a 6 
speed remote, which gives greater choice of comfort levels. 
 

SAFETY PRECAUTIONS 

41)  Europe: This appliance can be used by children aged from 8 years and above and persons with reduced physical, 

sensory  or  mental  capabilities  or  lack  of  experience  and  knowledge  if  they  have  been  given  supervision  or 

instruction  concerning  use  of  the  appliance  in  a  safe  way  and  understand  the  hazards  involved.  Cleaning  and 

maintenance shall not be undertaken by children without supervision. 

42)  Australia:  This  appliance  is  not  intended  for  use  by  young  children  or  infirm  persons  unless  they  have  been 

adequately supervised by a responsible person to ensure that they can use the appliance safely. 

43)  Children should be supervised to ensure that they do not play with the appliance. 

44)  An all-pole disconnection switch must be incorporated in the fixed wiring in accordance with the wiring rules. 

45) 

Do  not  dispose  of  electrical  appliances  as  unsorted  municipal  waste,  use  separate  collection  facilities. 

Contact  your  local  government for  information  regarding  the  collection  systems  available. If  electrical  appliances 

are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food 

chain, damaging your health and well-being. 

46)  The structure to which the fan is to be mounted must be capable of supporting a weight of 40kg. 

47)  The fan should be mounted so that the blades are at least 

2.3

 metres above the floor for Europe. 

48)  The fan should be mounted so that the blades are at least 

2.1

 metres above the floor for Australia. 

49)  This fan is suitable for indoor use only. Mounting the fan in a situation where it is subject to water or moisture  is 

dangerous. 

50)  Only an authorized electrician should execute the installation. 

 

Summary of Contents for Airfusion Akmani Series

























































Reviews: