Airfusion Akmani Installation Instructions
10 |
P a g e
become un-balanced again. Store your balancing kit away after installation for future use if required.
NOISE:
When it is quiet (especially at night) you may hear occasional small noises. Slight power fluctuations and frequency
signals superimposed in the electricity for off-peak hot water control, may cause a change in fan motor noise.
This is normal. Please allow a 24-
hour “settling-in” period, most noises associated with a new fan disappear during this
time.
The manufacturer’s warranty covers actual faults that may develop and NOT minor complaints such as hearing the
motor run
– All electric motors are audible to some extent.
CARE & CLEANING
Periodic cleaning of your ceiling fan is the only maintenance required. Use a soft brush or lint free cloth to avoid
scratching the paint finish. Please turn off electricity power when you do so.
Do not use water when cleaning your ceiling fan. It could damage the motor or the blades and create the possibility
of an electrical shock.
The motor has a permanently lubricated ball bearing. There is no need to oil.
NOTE:
Always turn off the power at the mains switch before attempting to clean your fan.
TECHNICAL INFORMATION
WARRANTY INFORMATION
IN AUSTRALIA / NEW ZEALAND
– Please refer to the separated WARRANTY STATEMENT.
IN EUROPE
– If you are a European customer please contact the retail outlet where the fan was purchase for
warranty service.
AIRFUSION
AKMANI SERIES
DC FAN models
Rated Voltage
Rated power
(motor)
Battery for remote
60
” blade fan only
220-240VAC
36W
1 x 12V 23AE
