manualshive.com logo in svg

Lubing TwinClean Line, Assembly Instructions Manual

Share
Download
Lubing TwinClean Line Assembly Instructions Manual Download Page 25

Drinking systems

floor watering system TwinClean Line

Copyright © 2018 Lubing System - All rights reserved

25

4.12  Wiring diagram circulation unit

4.13  Attendance and maintenance

Check the filter for contamination regularly. The interval depends on the water quality.

Inspect the whole drinking system of leakages between the circles. Also inspect the nipples. Should there be 

more than two drops within five minutes, the drinking line should be cleaned. We suggest EVC 12 for the cleaning 

between the passages. EVC 12 is available from us. 

At using the automatical flush system you have to check the correct position of the connection to the magnetic 

valve. Check the cables in the hutch of damaged isulation.

4.14  Trouble shooting

WARNING

At electrical power outage the magnetic valve is open!

ATTENTION

The filter cartridges can be blocked! 

In extreme case the water can not flow anymore!

TROUBLE

SUGGESTION

Flooding of the cup

Contamination of the valve seat in the nipple. Clean the valve seat 

and change the nipple if necessary!

Cup is empty

Accumulation at the nipple. Clean the nipple.

Insufficient water absorbtion of the 

animals

The drinking line is adjusted too high. Check the height 

adjustment according to “4.9 Height table”.

Insufficient water pressure at the 

breather unit

The water pressure is too low. Check the water supply! Look after 

the water filter because of accumulation!

Wet litter

The drinking lines are to low. Check the height adjustment 

according to “4.9 Height table”.

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

Summary of Contents for TwinClean Line































Reviews:

No comments

Brands by name

Popular brands

Load more brands