manualshive.com logo in svg

Lubing TwinClean Line, Assembly Instructions Manual

Share
Download
Lubing TwinClean Line Assembly Instructions Manual Download Page 13

Drinking systems

floor watering system TwinClean Line

Copyright © 2018 Lubing System - All rights reserved

13

(ventilation side) of the last ceiling hook.

2.  Screw on the deflection pulley and Hand Winch flush to the traction rope on the front wall.

Please observe the enclosed assembly and operating instructions for hand winches

. 

3.  Guide the front end of the traction rope through the guide pulley, pull taut, thread through the manual hoisting 

winch receiver, clamp using the attachment screw and regulate the tension using the winch.

4.  Remove the traction rope from the ceiling hooks with the exception of the last ceiling hook. Suspend the ceiling 

pulleys from each of the ceiling hooks.

3.4.3.2 Mounting the ceiling winches

1.  Secure the Ceiling Winch to a load-bearing element in the centre of the house.

2.  Secure the traction rope at both ends and pull towards the middle.

3.  Secure the traction rope to the Ceiling Winch.

4.  Cut the plastic rope to length (length = ceiling 20 cm). The first plastic rope must be longer (length 

= ceiling 20 cm + distance between the first two ceiling pulleys). Guide the plastic rope through the 

ceiling pulleys and secure to the traction cable using cable clamps 10 cm in front of each pulley in the direction 

CAUTION!

In order to prevent the traction rope from twisting, it must be unwound. Kinks and knots can arise when 

unwinding the traction rope.

CAUTION!

The wall must be load-bearing otherwise the entire tensile load will be borne by the deflection pulley. 

Please observe the information on the rating plate.

Item. no. 4415

Item. no. 4417/4428

ATTENTION

In order to prevent the traction rope from twisting, it must be unwound. Kinks and knots can arise when 

unwinding the traction rope.

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

lubingsystem.

com

Summary of Contents for TwinClean Line































Reviews:

No comments

Brands by name

Popular brands

Load more brands