background image

30366474EN-03

8

Alfa LU-VE is a trademark registered and owned by LU-VE Group. 

Alfa LU-VE reserves the right to change specifications without prior notification. 

4  Unpacking and lifting

Always follow guidelines and instructions as given in the air cooled liquid coolers product manual 

AHE00050. 

Before lifting the unit, check the weight stated on the name plate, located on the inlet connection 

side. Verify that the lifting equipment supports at least the unit weight plus 10%. 

•  Forklifts can be used only with 2 to 5 modules units.

•  When forklifts are used, forks must be longer than 2.5 m for safe lifting and be fully inserted 

under the unit. 

•  Unit shall be lifted only when empty.

Alfa-V VDD dry coolers can be delivered either on standard trucks or in containers. 

4.1  Unit delivered by standard truck

The procedure below applies to the unloading of units delivered on standard trucks.

2-5 fan pairs unit: 

can be unloaded from the side of the truck with 

the use of a forklift.  

6-9 fan pairs unit: 

shall be always lifted from above.

Follow the procedure described in paragraph 

"Lifting from above" for 6-8 modules unit.

9 fan pairs units are equipped by default with the 

container skid and should be unloaded follow-

ing the procedure described in paragraph "Unit 

delivered in a container" even if they are deliv-

ered by standard truck.

4.2  Unit delivered in a container

In case of container delivery, container skid option is to be selected in order to facilitate the loading 

and unloading operations. In case of 9 modules unit, skid is installed by default. Follow the proce-

dure below to unload the unit:

•  Remove any obstacle to allow the skid sliding out of the container.

•  Ensure the truck is stopped.

Summary of Contents for Alfa LU-VE Alfa-V VDD





















Reviews: