Digital Video Recorder User Manual
31
2.3 Using the Unlock Pattern for Login
Purpose
For the
admin
, you can configure the unlock pattern for device login.
2.3.1 Configuring the Unlock Pattern
After the device is activated, you can enter the following interface to configure the device unlock
pattern.
Figure 2-8
Set Unlock Pattern
Step 1
Use the mouse to draw a pattern among the 9 dots on the screen. Release the mouse
when the pattern is done.
Figure 2-9
Draw the Pattern
Connect at least 4 dots to draw the pattern.
Each dot can be connected for once only.
Step 2
Draw the same pattern again to confirm it. When the two patterns match, the pattern is
configured successfully.