Digital Video Recorder User Manual
193
Figure 15-7
Camera Parameters Settings
Step 2
Select the
Camera
from the drop-down list.
Step 3
Configure the parameters.
Switch the 4 MP or 5 MP signal from the
Signal Switch
drop-down list. 4 MP 25/30 fps
and 5 MP 20 fps are selectable. The 4 MP 25 fps and 4 MP 30 fps signals are
self-adaptive for the camera.
Check
Enable
Defog
to enable the defog function of the selected camera. And set the
Defog Level
from 1 to 4.
Adjust the parameters including
Day to Night Sensitivity
,
Night to Day Sensitivity
and
IR Light Brightness
for the analog cameras.
Select the
Day/Night Mode
of the camera from the drop-down list.
Check the
WDR Switch
checkbox to enable the function of the camera.
Step 4
(Optional) Click
Default
to set the parameters to the default settings.
Step 5
(Optional) Click
Copy
to copy the parameters of the current camera to other analog
cameras.
Step 6
Click
Apply
to save the settings.
The camera parameters settings is only applicable for ananlog cameras.
The 4 MP/5 MP Signal Switch, Defog, Day to Night Sensitivity, Night to Day Sensitivity, IR
Light Brightness, Day/Night Mode, and WDR Switch functions must be supported by the
connected analog camera. You cannot set the parameters if the connected analog camera
does not support them or there is no video signal.
The parameters are saved to the connected analog camera and are not saved to the DVR.