Digital Video Recorder User Manual
169
13.1.3 One-touch Configuration
Purpose
Through one-touch configuration, you can quickly create the disk array. By default, the array type
to be created is RAID 5.
Before you start
1.
The RAID function should be enabled.
2.
As the default array type is RAID 5, please install at least 3 HDDs in you device.
3.
If more than 10 HDDs are installed, 2 arrays can be configured.
Step 1
Enter the RAID configuration interface.
Menu > HDD > RAID
Figure 13-3
Physical Disk Interface
Step 2
Check the checkbox of corresponding HDD No. to select it.
Step 3
Click the
One-touch Config
button to enter the One-touch Array Configuration interface.
Figure 13-4
One-touch Array Configuration
Step 4
Edit the array name in the
Array Name
text filed and click
OK
button to start configuring
array.
If you install 4 HDDs or above for one-touch configuration, a hot spare disk will be set by default. It
is recommended to set hot spare disk for automatically rebuilding the array when the array is
abnormal.
Step 5
When the array configuration is completed, click
OK
button in the pop-up message box to
finish the settings.
Step 6
You can click
Array
tab to view the information of the successfully created array.