Insert the Card
Upward
LTL A
CORN®
6
Figure 2-2
Attention: Please switch the camera to OFF mode before loading or removing
batteries/ SD card.
2.3 Insert SD Card
The camera does not come with internal memory. please insert the SD card properly before
powering on, or No SD Card! would be prompted and data cannot be stored. Before inserting
the SD card, please make sure the write-protect switch is on “OFF” side (NOT in the “LOCK”
position). The supported memory capacity is up to 16GB. If you use a SD card which capacity
is larger than 16GB, please make sure that you test it in advance.
•
Replace the cover.
To install the additional battery box (Part # Ltl-MM3), please refer to Appendix III:
Instructions For Installing Battery Box)
Alternatively the camera can run on an external 6V~12V DC power source (optional).
When both external power and batteries are connected, the camera will be powered by
the external one preferentially. Bundled with our external solar power supply (purchased
When battery level gets low, in the TEST mode, the message “Low Battery” would be
shown on the TFT LCD screen.
The MMS wireless camera (Part # Ltl-5511MG/WMG ) will automatically send a “Low
battery” text alert to your cell phone. Meanwhile, the battery level would be shown as Code
B1/B2/B3
on the received MMS pictures.
B3
means high level and
B1
indicates the level
is low and you may need to change the batteries soon.