LTL A
CORN®
17
MMS Status
, choose among three options: “VGA”,
“SMS”, and “OFF”.
•
VGA: the camera will send 640×480 pictures to your phone or e-mail account
•
SMS: the camera will send only texts to you
•
OFF: the camera will not send anything
Then you need to choose how you like to set up the MMS Mode
--
Auto
or
Manual
. Choose
Auto
(recommended), then select
the country and the Mobile Phone Network Operator (MPNO).
With
Auto
setup, the URL, APN, Gateway, and Port sections will be in gray. You would
only need to input the
phone number and/or email address
you’d like to receive MMS
pictures. You can enter up to three different
phone numbers and/or email accounts.
NOTE
: At least one valid phone number needs to be put in. Otherwise the camera would
not be able to send data. The phone number cannot start with 0. If used locally, the country
code needs not be included; if absolutely necessary, please replace the initial zero(s) with
“+”. For example: “001” would become “+1”.
If you choose
Manual
to manually input all the parameters, you need to contact your
Mobile Phone Network Operator (MPNO) to have them provide you all the required
information such as URL, APN, Gateway, and Port.
NOTE
: The MMS parameters of the major MPNO’s in each country have been pre-stored
in the setup program. You’re recommended to choose
Auto
to let the system to set up
the MMS. However, because each local MPNO has their own settings for their MMS
service, and those settings can change over time, you may need to acquire the settings
from your MPNO if the
Auto
have changed according to the information provided by your MPNO, or you have settings
from your MPNO that is not on our Operators list, please notify us so we can update our
program.
example, the SD card is inserted on Drive F:\. Then you select only F:\.
DO NOT choose
any folder under F:\.
Click on . A message window pops out as below. Click
OK
setup.dat
has been created and saved in the root directory of the SD card.