LTL A
CORN®
21
Retrieve the SD card and insert it in the camera. Switch to the
TEST
position to enter
the TEST mode. Message“Updated smtp.dat Successfully” show up on the TFT display,
3.6 SMS Remote Control & Table of Command Code
In order to communicate with your camera via text message/SMS, you need to format
your texts in a certain way, essentially speaking the same language as the camera. Or
download the SMS Remote Control APP from LTL ACORN’s website (www.ltlacorn.cn)
to send SMS commands, please refer to the Instruction of SMS Remote Control APP for
operation details.
•
All the SMS commands should start with “LTL(ltl)” and end with “AA(aa)”.
•
can choose to give one instruction at a time, but it saves time to combine them together.
•
order code, an asterisk (*), a code value (a number or a combination of numbers and
letters), and lastly a pound/hash sign (#). See the “Example” column for illustrations.
•
Both capitalized and non-capitalized letters can be used in a command.
•
Do NOT leave any spaces between any of the letters and symbols.
•
Do NOT put a comma or a period at the end of the text. Again, a command starts with
“ltl” and ends with “aa”. Do NOT include any quotation marks in a command; they are
used here just for explanation purposes.
•
The maximum for text messages is 60 bytes. If you want to send multiple commands,
please do so in separate texts.
An example of a command would be LTL01*0#02*2#06*S30#07*10A3Z#60*1#AA
Which asks the camera to 1) be in camera mode and take only pictures, 2) set image size
to 2MP, 3) take pictures with an interval of 30 seconds, 4) turn on serial number and set it
to “0A3Z”, and 5) immediately take a picture and send it to you.
•
For SMS remote control setting, different value comes with different extra power
consumption:“0” the highest and “off” zero.
•
If your phone number is put in properly during setup, once the camera receives the
command, it will send you a text message saying “Message format OK”. If the code
60 function is turned on, the camera will also send a picture that it takes after
executing the command along with the text message.
Note: When using order code 12 and13 to set additional phone numbers or email
using code 13 will not be accepted if the code 12 slot is empty.