LTH Electronics MXD70 Series, Manual, Page: 512 / 631

Current Outputs
MXD70 Setpoints, Current Outputs,
and Digital Inputs Configuration Guide
- 21 -
Current Outputs
Current Outputs
The MXD70 Series can be fitted with up to six current outputs designated A – F. Each individual current
output can be assigned to any one of the Sensor Input Channels. The current output menu contains all
of the necessary setup functions to configure the current output sources. The instrument can display
all of the enabled current outputs on one trend screen or alternatively if displaying only one sensor
input channel, two trends can be shown on the front screen (see Configuration – Setup Front Screen ,
User Interface).
Main Menu
From the front screen press the menu button to show
the main menu options and select 4-20mA Outputs.

/

– Select Option
EXIT – Return to Front Screen
– Enter Option
Outputs Setup
Select the Current Output you wish to edit.

/

– Select Option
EXIT
– Return to Main Menu
– Enter Option
Channel
The “Sensor Input Channel” the current output is to
be associated with. The channels shown depend on
the configuration of the instrument.
To disable the current output select the disabled
option. This will turn off the output, remove it’s
reading from the front screen, the current output
trend screen and the menu header. It will also clear
any error messages associated with it.

/

– Select Option
EXIT
– Cancel
– Save Selection