Original Instructions for Installation, Use and Maintenance
Active Chilled Beam Type HDC
Section:
Page:
Date:
AG--B 213.1e
7
Feb. 2010
The Innovation Company
LTG Aktiengesellschaft
E
LTG Aktiengesellschaft
⋅
Grenzstraße 7
⋅
D-70435 Stuttgart
⋅
+49 (0711) 8201-0
⋅
Fax -720
Internet: http://www.LTG-AG.de
⋅
E-Mail: [email protected]
⋅
Printed in Germany
⋅
Ausgaben mit früherem
Datum werden hiermit ungültig
⋅
Technische Änderungen vorbehalten
⋅
Former editions are invalid
⋅
Subject to technical modifications.
1.
Transport and Storage
The unit requires dry and dust--free conditions during transport, storage, installation, and operation.
The unit is supplied in corrugated board boxes secured with straps.
Units are stacked on Euro or single trip pallets and secured with straps. Pallets may be moved using forklifts
or cranes.
Do not remove the packaging unless immediately prior to installation on site to protect the unit from pollution
and damages.
LTG Aktiengesellschaft will not take responsibility for any pollution of or
damages to the unit.
1.1
Transport Instructions
Handle units appropriately and with care during transport.
Do not throw, let drop to the ground or bump into other items or walls.
Make sure that units are safely fastened during transport and avoid damage through other items.
It is recommended to always have units handled by at least two persons.
The packaging is not weather--resistant.
1.2
Storage
Make sure that units are entirely protected against weathering, humidity, and other adverse conditions that
might result in damages during storage.
The storage location must meet the following climatic requirements:
Temperature b5
_
C and +55
_
C with a relative humidity of 90 % max. (non--condensing).
