Quick Start Guide of Network Video Recorder
20
Figure 3. 9
Wizard
3.7
Network Settings
Purpose:
Network settings must be properly configured before you operate NVR over network.
Steps:
1.
Enter the Network Settings interface.
Menu > Configuration > Network
Figure 3. 10
Network Settings
1 self-adaptive 10M/100M/1000M network interface or 1 self-adaptive 10M/100Mbps network interface
provided for LTN87XXT-HT.
2.
Select the General tab.
3.
In the General Settings interface, you can configure the following settings: NIC Type, IPv4 Address, IPv4
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
