Quick Start Guide of Network Video Recorder
19
Figure 3. 8
Configure Signal Input Type
3.
Click Apply to save the settings.
l
Each two video channels are grouped in sequence, e.g., CH01 and CH02, CH03 and CH04..., and each two
channels in the same group must be connected with the same type of video source selected on GUI. For
example, when the TVI/CVBS signal mode is selected, then either TVI or CVBS signal input can be connected
to the channels in the same group; and when the AHD signal mode is selected, only the AHD signal input
can be connected.
l
For LTN87XXT-HT, the default TVI/CVBS signal input type also supports the auto detection of 3MP signal.
Each two types of the TVI/CVBS signals can be mixed randomly.
l
In the live view interface, when there is no video signal of the analog channel, the corresponding
connectable video signal type message can be displayed on the screen.
l
For LTN87XXT-HT, the IP channels will not be displayed on the interface and you can view the max. IP
camera accessible number in the Max. IP Camera Access text field. Disabling one analog channel will add
one IP channel.
3.6
Using the Setup Wizard
The Setup Wizard can walk you through some important settings of the device. By default, the Setup Wizard
starts once the device has loaded.
Check the checkbox to enable Setup Wizard when device starts. Click Next to continue the setup wizard. Follow
the guide of the Setup Wizard to configure the system resolution, system date/time, network settings, HDD
management, record settings, etc.
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
