• Refit the lid to the back box, using the supplied screws.
• Put the QR code available in the box either on the system map or
on the dedicated pages at the end of translator or expander manual.
ELECTRICAL SCHEME FOR THE CONNECTION OF THE INPUT
MODULE TO THE EXTERNAL DEVICE WHICH TRANSMITS
THE INPUT SIGNAL TO THE MODULE
5
6
EXTERNAL
DEVICE
- +
- +
- +
• The
10K
Ω
R
resistor monitors whether the cable has been damaged
or the connection is no longer available.
• The
5.6K
Ω
R
resistor comes in and out of circuit depending on the state
of the 3rd party device (alarm resistor).
• If you fail to install these resistors correctly the device will not operate as
intended.
• Ensure the 3rd party device offers a voltage free relay switch.
Note: install a properly fire rated cable (according to national code of practice)
between the third-party device and the input module.
EOL
AL
R
EOL
R
AL
R
EOL
10 K
Ω
R
EOL
5.6 K
Ω
QUICK START GUIDE
ARGUS SECURITY SRL
, VIA DEL CANNETO, 14, 34015 MUGGIA, (TS), ITALY
L50-MIS-0001 (Rev_P.1)
FI750/RF/M1IN
WIRELESS BATTERY POWERED INPUT MODULE
FI750-RF-M1IN_IA_EN--2020--Installationsanleitung.pdf
