LSI Corporation
- 12 -
MegaRAID SAS 9285CV-8e RAID Controller Quick Installation Guide
March 2014
Attaching a CVFM03 Module to the RAID Controller and Connecting to a Remote CVPM02
Module
Figure 8 Connecting the CVFM03 Module on the RAID Controller to the CVPM02 Module on the Remote Mount Board
3.2.6
Reinstalling the RAID Controller on the Motherboard
Follow these steps to reinstall the RAID controller on the motherboard.
1.
With the power to the chassis still turned off, and the power cords unplugged, make sure that the chassis is
grounded and has no AC power.
2.
Install the RAID controller in a PCIe slot on the motherboard, as shown in the following figure.
NOTE
Some PCIe slots support only PCIe graphics cards. If a RAID controller
is installed in such a slot, the controller will not function. Refer to your
computer documentation for information about the PCIe slot.
3.
Press down gently, but firmly, to seat the card correctly in the slot.
4.
Secure the controller to the computer chassis with the bracket screw.
3_00924a-00
CacheVault
Power Module 02
(CVFM02)
J2A1
Summary of Contents for MegaRAID SAS 9285CV-8e
Page 16: ......
