LSI Corporation
- 8 -
MegaRAID SAS 9285CV-8e RAID Controller Quick Installation Guide
March 2014
Attaching a CVFM03 Module to the RAID Controller and Connecting to a Remote CVPM02
Module
3
Attaching a CVFM03 Module to the RAID Controller and Connecting to a
Remote CVPM02 Module
This section describes how to attach the CVFM03 module to the MegaRAID SAS 9285CV-8e RAID controller and then
connect the CVFM03 module to the remote CVPM02 module.
3.1
Top View and Bottom View of the CVFM03 Module
The following figure shows the top view and the bottom view of the CVFM03 module. The top view is the side that
you can see when the unit is installed on a RAID controller.
Figure 4 Top View and Bottom View of the CVFM03 Module
3.2
Attaching the CVFM03 Module to the RAID Controller and Connecting to the Remote
CVPM02 Module
Perform the tasks described in this section to install the CVFM03 module directly on the MegaRAID SAS 9285CV-8e
RAID controller, connect the CVFM03 module to a CVPM02 module on a remote mount board, and install the RAID
controller and the remote mount board.
CAUTION
Electrostatic discharge (ESD) can damage the CVFM03 module and the
MegaRAID SAS 9285CV-8e RAID controller. Make sure that you install
the CVFM03 module at an ESD-safe workstation that meets the
EIA-625 specification. When you install the CVFM03 module, follow the
ESD-recommended practices in the latest revision of the
IPC®-A-610 specification.
Top View
Bottom View
J2A1
Connector
J2M1
Connector
3_00917-00
Summary of Contents for MegaRAID SAS 9285CV-8e
Page 16: ......
