Page 4
LSI Corporation Confidential
|
August 2010
MegaRAID LSIiBBU08 Intelligent Battery Backup Unit Quick Installation Guide
Front View and Rear View of the LSIiBBU08
To mount the LSIiBBU08 on the RAID controller directly, follow the steps in
Installing the
LSIiBBU08 Directly on the MegaRAID SAS RAID Controller
.
To connect the LSIiBBU08 to the RAID controller remotely, follow the steps in
Connecting the LSIiBBU08 Remotely to the MegaRAID SAS RAID Controller
.
Front View and Rear View of the
LSIiBBU08
The following figure shows the front view and the rear view of the LSIiBBU08. The front
view is the side that you can see after you install the LSIiBBU08 on the RAID controller.
Note that the LSIiBBU08 combines a battery pack with a daughtercard. The LSIiBBU08
uses screws and standoffs to connect to the controller.
1. J2 remote connector
2. J1 board-to-board connector
Figure 1: Front View and Rear View of the LSIiBBU08
NOTE:
Record your controller serial number in a safe location in case you need to
contact LSI.
Model: BAT 1S1P
WARNING:
The battery used in
this device may present a risk of fire or
chemical burn if mistreated. DO NOT
dissemble, heat above 60C, crush or
puncture, short circuit external contacts,
or dispose in fire or water.
85065-00
J1
1
Contains:
Sony US454261A8T Cell
Rechargeable Li-Polymer
Battery Pack
Rating:
3.7V; 1.59Ah; 5.9Wh
Finished in China
BBU P/N: L4-25343-04
BBU S/N:SY02700225SO
Li-ion
2
J2
5
Summary of Contents for MegaRAID LSIiBBU08
Page 16: ...46307 00A...
