2-24
Installing the LSI22910
2.3 Completing the Installation
Before replacing the cover on your computer, review this installation
procedure check list. This can save you effort later.
Step 1.
Replace the cabinet cover on your computer.
Step 2.
Plug in all power cords, and switch on power to all devices and
your computer.
Step 3.
Wait for your computer to boot up.
Step 4.
To change the configuration of your host adapter, see
Chapter 3, “Configuring the LSI22910.”
Finally, refer to the PCI
Storage Device Management System SDMS 4.0 User’s Guide
(or the guide for the software you will use) to load the driver
software for your particular operating system.
Verify Installation Procedures
Done
Host adapter connection in PCI bus slot secure
Internal SCSI bus connections secure (pin-1 continuity)
External SCSI bus connections secure
Proper SCSI bus termination established
Unique SCSI IDs set and recorded for each device
Summary of Contents for LSI22910
Page 4: ...iv...
Page 10: ...x Contents...
Page 16: ...1 6 Using the LSI22910...
Page 64: ...A 10 Technical Specifications...
