LSI LSI22910, User Manual

Page: 23 / 82

Detailed Installation Procedure 2-7
2.2.3 Connecting the SCSI Peripherals
All internal SCSI bus connections to the LSI22910 are made with an
unshielded, 68-conductor ribbon cable (see
Figure 2.3 ). One side of this
cable is marked with a color to indicate the pin-1 side. The connectors
on this cable are keyed to ensure proper pin-1 connection. Use
Ultra/Ultra2 rated cables for these bus speeds. (See
Table 1.1 .)
All external SCSI bus connections to the LSI22910 are made with
shielded, 68-conductor cables (see
Figure 2.3 ). The connectors on this
cable are always keyed to ensure proper pin-1 connection. Some internal
cables come with a SE/LVD on one end. This end should be furthest
from the host adapter.
Figure 2.3 SCSI Cables
SCSI Cable for Internal Connections
68-pin
SCSI Cable for External Connections
68-pin
High Density
VHDCI