LSI 620J, Installation Manual, Page: 17 / 46

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Steps to Install – Storage Enclosure
620J Storage Enclosure Installation and Overview Guide 2-7
Figure 2–5 Sliding the Storage Enclosure into the Clip on the Mounting Rail
1 Mounting Rail
2 Clip
3 Partial View of the Storage Enclosure Rear Sheet Metal
4 Align the hole in the storage enclosure sheet metal with the captured nut
in the mounting rail.
7
Secure the front of the storage enclosure to the cabinet. Use the two screws to
attach the flange on each side of the front of the storage enclosure to the mounting
rails (
Figure 2–6 ).
a
Insert one M5 (12mm) screw through the bottom hole of a flange on the
storage enclosure so that the screw goes through the cabinet rail and engages
the bottom captured nut in the mounting rail. Tighten the screw.
b
Repeat substep a for the second flange on the other side of the cabinet.
Figure 2–6 Attaching the Front of the Storage Enclosure
1 Screws for Securing the Front of the Storage Enclosure
78039-10
1
2
3
4