LSI 620J, Installation Manual, Page: 10 / 46

Preparing for an Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-4 620J Storage Enclosure Installation and Overview Guide
Things to Know – Taking a Quick Glance at the
Hardware
ATTENTION
Risk of equipment malfunction – To avoid exceeding the functional
and environmental limits, install only drives that have been approved
by your supplier. Drives might be shipped but not installed. System
integrators, resellers, system administrators, or users can install drives.
IMPORTANT
Each storage enclosure in the storage array must have a minimum of
two drives for proper operation. If an enclosure has fewer than two
drives, a power supply error is reported.
Figure 1–1 620J Storage Enclosure – Front View
1 Left End Cap (has the storage enclosure LEDs)
2 Drive Canisters
3 Right End Cap
Figure 1–2 620J Storage Enclosure – Rear View
1 ESM A Canister
2 Host SFF-8088 Connector 1
3 Host SFF-8088 Connector 2
4 Seven Segment Display Indicators
5 Serial Connector
6 Ethernet Connector
7 Expansion Port SFF-8088 Connector
8 Power-Fan Canister
9 Power Connector
10 Power Switch
11 Blank ESM B Canister
97002-09
2 3 4 5 7 6 1
9 8 10
11
8 10 9