LSI 620J, Installation Manual, Page: 11 / 46

620J Storage Enclosure Installation and Overview Guide 2-1
Chapter
2
Installing the Storage Enclosure
Things to Know – General Installation
IMPORTANT
If you are installing the storage enclosure in a cabinet with other
enclosures, make sure that the combined power and weight
requirements of the storage enclosure and the other enclosures do not
exceed the capacity of your cabinet.
•
Special site preparation is not required for this storage enclosure beyond what is
normally found in a computer environment.
•
The power supplies meet standard voltage requirements for both domestic and
worldwide operation.
•
If you are installing multiple storage enclosures within a cabinet, keep as much
weight as possible in the bottom half of the cabinet.
IMPORTANT
After you install the storage enclosures, you might replace drives or
install additional drives. If you replace or add more than one drive
without powering down the storage enclosure, install the drives one at
a time. Wait 10 seconds after you insert each drive before inserting the
next one.
Navigational Aid
“ Things to Know – General Installation “ Page 2-1
“ Steps to Install – Storage Enclosure “ Page 2-2
“ Steps to Install – Drives and Drive Canisters “ Page 2-9
“ Things to Know – Connecting Power Cords “ Page 2-10
“ Steps to Connect – Power Cords “ Page 2-11