Sphensor
–
User manual
LSI LASTEM SRL
INSTUM_04291
Pag. 12 / 32
6.
Turn on the sensor that needs to be configured and wait for the program to recognize it.
Once identified, it is displayed with the following information:
-
Serial
: is the serial number of the sensor.
-
Hub
: is the serial number of the Sphensor Gateway to which it is "hooked".
-
Name
: is the sensor name. By default it corresponds to the serial number. You can edit this
text using the
Set alias
command of the
Utilities
menu in order to give the sensor a more
representative indication (for example its progressive numbering or its location in the envi-
ronment).
-
Endpoint
:
the sensor’s IPv6 address.
-
Timestamp
: is the date/time of the last message received from Sphensor Gateway.
-
Model
: is the model of the sensor.
-
Stack
: defines the type of sensor operation (
ftd
: the sensor can also act as a radio repeater;
mtd
: the sensor does not have a radio signal repetition function but, for this reason, it can
operate at low power consumption).
-
Version
: is the firmware version of the sensor.
-
Last Message type
: is the type of message received.
-
RSSI
: is the radio signal strength of the last message received. The indicated value moves
within a scale from -100 to 0 (-100 = signal absent; 0 signal at maximum power). Normally
the value is around -60...-70.
-
RLOC
: the pair of RLOC belonging to the sensor and to its parent; through these pairs it is
possble to reconstruct the hierarchical structure of the devices connected to the PAN.
7.
Select the line of the sensor to edit, then choose
Sensor Configuration
.