R-Log – Quick Start
Cod. INSTUM_00953
Pag. 7
3DOM program uses the Italian language in case of Italian version of the operating system; in case
of a different language of the operating system, the program 3DOM uses the English language. To
force the use of the Italian or the English language, whatever may be the language used by the
operating system, the file “C:\Programmi\LSILastem\3DOM\bin\3Dom.exe.config” will have to be
opened with a text editor (for ex. Notepad) and change the value of the attribute
UserDefinedCulture
by setting
en-us
for English and
it-it
for Italian. Below is an example of setting for the English
language:
<setting name="UserDefinedCulture" serializeAs="String">
<value>en-us</value>
</setting>
3.2.
Datalogger configuration
Per procedere alla configurazione di uno o più datalogger è necessario eseguire, per ciascuno
strumento, le indicazioni di seguito riportate.
For ERL515M, ERL516M, ELR515S and ELR515R models:
Start the instrument;
Insert the instrument in 3DOM;
Check the instrument’s internal clock;
Create the configuration in 3DOM;
Send the configuration settings to the instrument.
For ELR510M, ELR510S and ELR510R models:
Connect all probes to the instrument inputs;
Start the instrument;
Perform probe auto-recognition;
Insert instrument and set its configuration on 3DOM;
Check the instrument’s internal clock;
Modify the configuration in 3DOM;
Send the configuration settings to the instrument.
3.2.1.
Starting the instrument
R-Log is provided with a rechargeable internal battery. All models can also be powered through an
external 8 ÷ 14 Vcc (BSC015) power-supply, by means of the connector located on the instrument
top panel; in this case the positive pole is the one inside the connector.Ensure not to invert the power
supply polarity, even if the instrument is protected against this incorrect operation.
ELR515M, ELR515R, ELR515S and ELR516M models can also be power supplied through the
terminal board. Refer to the following table for connection to the instrument input terminals and to
sensors or electricity-powered devices output terminals.
