LSI LASTEM E-Log, User Manual

Page: 17 / 62

LSI LASTEM E-Log – User’s manual
17
4.2. Using the keyboard
The keyboard includes a series of arrow keys and two function keys. The following table
summarizes the main functions of each key, contextually according to the state the instrument finds
itself in.
While starting the instrument:
Determines the fast acquisition mode of the measures (see §5.2.5)
While showing the values of the measures:
Goes to the diagnostic window Type 1
Changes the display mode of the measure name (extended, abbreviated), of
the measure unit and the number of terminal which the sensor is connected
to
Scrolls up the measure list
Scrolls down the measure list
Holds/releases measure scrolling
Switches the display off and on (see §4.3.4)
While showing diagnostic information:
Shifts to the display window of the values of the measures.
If applicable, it resets display data (statistics, errors and other information);
in the type 5 diagnostic window, it resets the GPRS modem.
In the display window of the communication statistics it shifts from serial 1
statistics to serial 2 and vice versa; in the type 5 diagnostic window it shows.
or hides the additional information about the GPRS modem (only LSI
LASTEM technicist).
Shows the previous diagnostic window.
Shows the next diagnostic window.
In the type 5 diagnostic window it switches on the GPRS modem (in case
it’s switched off) and starts the data communication through GPRS.
In the type 5 diagnostic window it resets GPRS modem.
.