background image

 

 

 

 

 

ACE M2 

  To disconnect, turn all controls to the off position, remove the safety key, and then remove the plug 

from the outlet.  

 

The pulse sensors are not medical devices. Various factors, including the user’s movement, may 

affect the accuracy of heart rate readings. The pulse sensors are intended only as exercise aids in 

determining heart rate trends in general.  

  Use the handrails provided; they are for your safety.  

  Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on your 

treadmill. Quality athletic shoes are recommended to avoid leg fatigue.  

  Before undertaking any type of exercise program, it is recommended that you consult a doctor. 

  Injuries to health may result from incorrect or excessive training. 

  This appliance is not intended for use by persons (including children) with reduced physical, 

sensory or mental capabilities, or lack of experience and knowledge, unless they have been given 

supervision or instruction concerning use of the appliance by a person responsible for their safety. 

  WARNING heat rate monitoring systems may be inaccurate. If you feel faint stop exercising 

immediately.  

  Children should not be allowed on or around the equipment, even when not in use. 

  Children should be supervised to ensure that they do not play with this machine 

  Loose-fitting clothing or jewellery that could become an entanglement hazard should not be worn. 

  Training shoes should be worn when using the equipment. 

  Equipment must be used on a level and stable surface. 

  All fixings should be checked before the equipment is used. 

  All literature relating to the use of the equipment should be retained for future reference. 

  Recommended operating temperature: 5-40°C  

Remove the safety key after use to prevent unauthorized treadmill operation.  

 

 

Summary of Contents for ACE M2

































Reviews: