9
ACE M2
STEP 3:
STEP 4:
1. Using 5# Allen wrench (12), screw the
Bolt M8*45 (70) through the Lock
Washer (64). Using these, secure the
right upright to the Main Frame.
2. Using the 5# Allen wrench, screw the
M8*16 Bolt (51) through the Lock
Washer (64). Using these, further
secure the right upright tubes to the
main frame.
3. Repeat the above two steps for the
opposing side
Note: Continue to support the upright tubes
during this step.
1. Pull up the Computer and L&R
uprights.
Note: Ensure that you continually support
the uprights with hands to avoid them
falling down and cause injury.
