UNITOUR Power System
User Manual
Page 36
To set a maximum level for a channel(s), from the “DIMMER SETUP Menu” above tap
MAX
LEVEL
. The previously selected channel(s) are still valid. If you want to change your selection
tap
SELECT CHANNELS
or use the
CHANNEL SELECT
buttons located on the output
modules to select the channel(s).
Set the maximum level by either entering the number on the touchscreen keypad or using the
or
arrows.
Max level
3.13.4
Curves
Dimmer channels can have a curve that sets the
“transfer characteristic” between input control
signal and channel output level. It defines how the dimmers output voltage responds to the
control signal input.
UNITOUR provides several different curves and each has a different response. You can try
each curve to see which one gives you the most linear results for you lighting fixtures. If your
rig also has some other types of dimmers you can experiment to find which curve gives the
best match to those dimmers.
To select a curve, from the “DIMMER SETUP Menu” above tap
CURVES
. The previously
selected channel(s) are still valid. If you want to change your selection tap
SELECT
CHANNELS
or use the
CHANNEL SELECT
buttons located on the output modules to select
the channel(s).
Curves
The choices are:
•
Linear
(Default)
•
S curve
•
Square
•
Cube Law
Selected
Curve
