©
LSC
®
- www.lightstreamcontrols.com - SC-8 System™ Instruction Manual Page 8
©
LSC
®
- www.lightstreamcontrols.com - SC-8 System™ Instruction Manual Page 7
SC-8 System™
Functions and Controls
details, refer to the T16F user instructions.
5. Flash Button -
Pressing and holding the desired buttons will
allow you to turn on the corresponding channels temporarily.
Releasing the desired buttons will turn off the channels.
6. Control Output -
Using the included 9-pin com cable, connect the
SC-8 controller to the SRP8 power pack. When using the cable for
connection, up to two power packs can be controlled by this unit.
7. Foot Control Connector -
Connection for the use of the T16F.
8.
Fuse Holder -
This housing stores the protective 3 amp fuse.
Always replace with the same exact fuse.
9. AC Input -
Connects to a standard AC outlet.
10. 9-Pin Output Connection -
This connection is used to link up
other power packs. Up to two power packs can be controlled
by this unit.
11. 9-Pin Input Connection -
Using the included 9-pin com cable,
connect the SC-8 controller to the SRP8 power pack.
12. Circuit Breaker -
This 15A circuit breaker protects against the
risk of electrical shock or fire and protect the circuitry. In the case
of an internal short or power surge.
13. AC Input -
Connects to a standard AC outlet.
SC-8 System™ Rear Connections and Functions
10
13
12
11
