Mantra Lite
Quick Start Guide
Page 21
•
“Crossfade” of a chase or animation.
•
“Tap To Beat” to set the speed of a chase, animation or
shape.
Each set of controls only becomes active when one of the
above parameters is either active on the output or “selected”
as described below.
Moving an encoder wheel to the right or touching
+
increases
the value by multiplying the recorded value. Moving it to the
left or touching
-
decreases the value by dividing the recorded
value.
When the
Select
button is grey, the controls will override all
live output.
If you touch
Select
it turns blue and you can now choose
which playback to override by tapping the buttons below the
playbacks. Multiple playbacks can be selected and or
deselected. The LED in the playback button lights to show it is
selected.
17.5
Tap To Beat
You can set the speed of a chase, animation or shape and by
tapping the beat.
Play the chase, animation or shape on the output then from the
“Home” screen press Live Speed.
Tap the Tap to Beat button at least 4 times at the desired rate.
Mantra Lite averages all of your taps to set the speed. If you
have tapped a speed and then want to change it, pause for 2
seconds then start tapping again (at least 4 taps).
17.6
Page Freeze
A “PAGE FREEZE” feature prevents the contents of an “active”
Red playback fader from being changed if its level is above 0%
when a different page is selected.
The colour at the top of each playback icon shows its page
status.
Red =
current page
Black = not
current page
