Mantra Lite
Quick Start Guide
Page 5
3
Undo
To quickly undo the last action double tap .
To undo more than one action tap once to see the list of
your actions.
Touch
Undo
to undo an action and step down the list. Touch
Redo
to redo an action and step up the list.
Tap the [
Back
] button to finish.
Note: The undo list is automatically cleared whenever you save
your show, start a new show or load an existing show.
4
Getting Connected
4.1
Power Input
Two models of Mantra Lite
are available:
•
The MANTRA/LT has an IEC mains input (90 volts to
260 volts).
•
The MANTRA/LT/E has 12 volt DC power input. An
external mains power pack is supplied.
4.2
DMX 512 Output
Connect a DMX data cable from the DMX512 output (one
universe of 512 channels) to the DMX512 input of your first
fixture (dimmer, LED or Mover) and loop to the next fixture/s.
Only use specific DMX cable (never use audio cable) and
always terminate the end of the DMX line. Set the required
DMX addresses on your equipment. Patch each fixture to a
yellow fixture fader. See section 20 for more details on
patching.
4.3
Ethernet Network Connector
The RJ45 Ethernet connector can be used to output sACN and
ArtNet. These are lighting control protocols that send DMX
lighting data over a network or to a lighting visualiser program
running on a computer.
4.4
USB Connectors
The two USB connectors can be used to connect:
