Page 8
speaking. Ambient noise may affect the listening operation of the
clock.
Battery Installation
Open the battery cover on the bottom of the clock. Insert 3 “AAA”
batteries according to the polarity sign, or where the flat part of
the batteries are placed against the springs inside the battery
compartment. If batteries were inserted properly, the clock will
begin operation automatically. The clock will display the default
time of “12:00 am”.
When using in only battery mode, if the alarm sound is too quiet
or the display is blurry or no colored lights are visible, please
replace the batteries. Please be sure to reset the correct time,
alarm and date after replacing batteries.
DO NOT mix old and new batteries. DO NOT mix alkaline,
standard (carbon zinc) or rechargeable (nickel cadmium)
batteries.
Non-rechargeable batteries must not be recharged.
The supply terminals must not be short-circuited.
When Using Rechargeable Batteries
