LS SV-xxx-iP5A-2, Manual

Page: 2 / 138

Safety Instructions
ii
WARNING

Do not remove the cover while power is applied or the unit is in operation.
Otherwise, electric shock could occur.

Do not operate the inverter with the front cover removed.
Otherwise, electric shock can occur due to the exposed terminals and bus bars.

Do not remove the cover except for periodic inspections or wiring, even if
the input power is not applied.
Otherwise, electric shock can occur due to accessing capacitor banks.

Wiring and periodic inspections should be performed at least 10 minutes
after disconnecting the input power and after checking the DC link
voltage is discharged with a meter (below 30VDC).
Otherwise, electric shock could occur.

Operate the switches with dry hands.
Otherwise, electric shock could occur.

Do not use the cable when its insulating tube is damaged.
Otherwise, electric shock could occur.

Do not subject the cables to scratches, excessive stress, heavy loads or
pinching.
Otherwise, electric shock could occur.
CAUTION

Install the inverter on a non-flammable surface. Do not place flammable
materials nearby.
Otherwise, fire could occur.

Disconnect the input power if the inverter has been damaged.
Otherwise, it could result in a secondary accident and fire.

Do not touch the inverter after shutting down or disconnecting it. It will
remain hot for a couple of minutes.
Otherwise, bodily injuries such as skin-burn or damage could occur.

Do not apply power to a damaged inverter or to an inverter with parts
missing even if the installation is complete.
Otherwise, electric shock could occur.

Do not allow lint, paper, wood chips, dust, metallic chips or other foreign
material into the drive.
Otherwise, fire or accident could occur.