3 - 12
(4) PTO select lever
z
It is used to select the Middle PTO and/or REAR
PTO. If placing the lever as below;
REAR :
Rear PTO shall only rotate.
MID+REAR
: Middle PTO and rear PTO shaft
shall rotate together.
MID
: Middle PTO shaft shall only rotate.
z
For PTO shaft speed, refer to the section 6,
“Dimension and specification” in this manual.
z
Before starting engine, place the PTO select
lever on “
REAR
” position. If the lever is placed
on the other position, you can not start the
engine, due to safety interlock system.
▶
After placing PTO switch in
OFF
and PTO shaft has been stopped completely, shift
the PTO select lever.
▶
If the PTO select lever is NOT engaged smoothly, lift up and down the rear
implement to align the drive shaft.
Caution
(3) Work light (optional)
z
There is a switch to turn on the rear work light.
z
ON
- place the switch to the right direction and
the work light shall be ON.
z
OFF
- place the switch to the left direction and
the work light shall be OFF.
▶
When driving on the road at night, do not let the rear work light stay ON position. It
may cause a disturbance to the driver of the following car.
Caution
OFF
ON
MID
REAR
MID+REAR
PTO select lever
